AES 7170 Instrukcja Użytkownika Pobierz pdf (Strona 14)

40-7705I-UM Page 14 Rev 4 March 16, 2007

4.0 Installation and Setup :

A separate “Initial Installation and Setup Guide” is provided to

guide you through the initial installation and setup.

A standalone Receiver requires a monitor, keyboard and mouse for user interface.

See Figure 4-1. The standalone configuration is not recommended by AES

Corporation for anything other than initial setup and preliminary testing of the

system. Once properly configured and connected to a LAN, a network

workstation is used to access and configure the receiver remotely. See Figure 4-2

and Figure 4-3.

A printer is also required for printing any output directed to the printer port.

Refer to Appendix F for a listing of printed messages. Ethernet port(s) are

integrated into the PC, and are used to connect to the IP-Link Transceiver(s) and

external applications on remote servers or systems via direct connection, LAN,

WAN or the Internet.

A system, while it may not have a keyboard, video monitor or mouse

connected during normal operation, will require these peripherals connected

directly for initial setup until remote access is accomplished. They may also

be needed later for occasional configuration modifications.

The 7705i, monitor and any network related equipment shall be connected to a

suitable UL-UPS to maintain power during power outages.

In a Dual system, each 7705i and the 7170 IP-Link Transceiver shipped, is

configured exactly the same. At least one set must be modified to operate the two

pairs together in the same TCP/IP network. Each device in the system must have

unique TCP/IP addresses. Each 7170 must have a unique Unit ID for the

IntelliNet Network it will operate in.

Figures 4-1, 4-2 & 4-3 on next pages illustrate some typical system installations.

The illustration on page 8 also illustrates a typical system.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 110 111

Brak uwag

AES 7170 Instrukcja Użytkownika Strona 14